001 Magic Ingredient Latest(2) - Flipbook - Page 17
Tight Rust with little
or no loose scale
For best results, saturate the tight rusted
surface with Owatrol oil and allow to dry.
(No descaling or wire brushing etc. necessary)
Follow with various options as outlined above.
Owatrol applied directly to
tight rust
Solutions to Other Rust
related Problems
Here are a few examples of other common rust
problems you can cure with Owatrol Oil.
Rusted nail heads, hinges, aerial or wall
hanging brackets, screws, parts, frost damaged
/ exposed steel reinforcing bar in concrete such
as sills, walls etc. Ride on mowers, tools, cars
and machinery. Hay sheds.
Broken anchor bolt rust
stopped with Owatrol
Nail heads
Using a small brush, dab on some Owatrol Oil neat to saturate, envelope & seal the
nail head. Paint over with oil based paint and Owatrol mix to match if required.
Hinges etc.
Exterior mounted steel hinges / fixtures on wooden doors etc. frequently rust on the
inside between the back of the hinge and the wood because moisture runs down
the door in behind the hinge and causes the steel to rust, resulting in unsightly rust
stains streaking down the wood surface below. Apply Owatrol oil to top of hinge
allowing it to soak down behind the hinge until you see it emerging out the bottom.
Add to paint etc. when dry.
Steel bolts, wall brackets in concrete or brick walls
As above, apply Owatrol oil neat with small brush to steel part where it enters the
wall. Owatrol oil will follow the steel into furthest point and seals it up against
subsequent moisture / oxygen ingress which causes the rust to develop. Paint over
that for best results. Rust stains can be easily removed with another Owatrol
product... Net-trol. [www.igoe.ie]
