001 Magic Ingredient Latest(2) - Flipbook - Page 7
Makes Oil Based Paint or Varnish Stick Like Glue – No
Peeling or Flaking
Any surface that has a history of peeling paint or varnish or will potentially throw off
the paint can be successfully painted with outstanding long lasting results. Most
common examples would be window sills, wall or pillar cappings, fascia boards, sun
facing doors and windows, garden ornaments, galvanised steel railings, gates, dusty
concrete floors etc.
Golden rule is... wire brush off any lose particles of paint, mix in about 25 to 40%
Owatrol oil into first coat of paint and apply. Add about 15% Owatrol oil into finish
coat for a beautiful finish – no brush marks.
By mixing in a strong mix of Owatrol oil (up to 30% or more – until ‘runny’) into the
first coat (on a clean, grease-free surface) you can make any oil based paint or
varnish stick like glue to what would normally be described as any ‘unpaintable’
surface without sanding, etching or other difficult, time consuming keying methods.
Example: Stainless steel, Aluminum, uPVC, Fiberglass, Copper, Brass, Tiles,
Melamine and lots more. Always add some Owatrol into finish coats for best finish
attainable. See below pictures of problems all easily solved by Owatrol Oil.
Owatrol Oil solves this peeling
paint problem for good. Add to
any oil based paint or varnish.
Makes paint stick to sills - no
more peeling
Makes paint stick or galvanized
railings
