Problem Solvers - Flipbook - Page 19
15.00,
82.50,
An exceptional finish starts with impeccable masking. With H2O Liquid Mask all you need to do is spray it, roll it or paint it on, all over
and nice and thick! No taping or scraping needed for the best finish ever.
- Paint & Peel
Coverage: 2m2 / Litre at 200 ЧM DFT (DFT = dry film thickness in microns)
- Extremely Fast
Recommended DFT: 200 ЧM DFT
- Clean Removal
Usual number of coats: 2 ; Colour: White when liquid, dries clear
- Dual Purpose Primer & Peelable Mask
Full cure: 24 hours @ 25o c, 40% RH ; Recoat time (minimum): 1 hour @25 o c
Can be Sprayed, Rolled or Brush Applied
Price Guide: 1L € 38.75, 5L € 199.75 plus VAT
- Perfect for Glassed Timber Doors
H2O can be used as a primer over knots if the timber is sanded. Can also be used as a primer for external environments.
Application
Step 1: Prepare Surface (Remove all debris & dust and sand down timber. If the timber had been previously painted
ensure the timber is fully sanded before applying H2O.
Step 2: Apply H2O Prime & Mask. (Stir thoroughly then apply H2O with either a synthetic bristle brush, long nap roller
(mid pile) or conventional airless sprayer, recommended typical tip size of 0.013 to 0.017. Theoretical coverage 2m
squared/ Litre at 200 ЧM DFT) (DFT = dry film thickness in microns)
Step 3: Leave to Fully Cure (Once H2O prime & mask turns clear: fully cured)- repeat process for a second coat. This
should take 30 - 60 minutes.)
Step 4: Cut & Peel (Carefully cut around inside edge of frames with a sharp knife & simply peel mask away from glass.
After use, clean applicators with water.)
32.00,
149.00
